Ubiquiti 5 GHz PowerBeam ac, 300 mm, ISO
PBE-5AC-300-ISO – forget about interference with the Ubiquiti isolator
The PBE-5AC-300-ISO device works in the 5 GHz band. It is characterised by 450+ Mbps bandwidth.
The PBE-5AC-300-ISO device increases the isolation of radio waves. It works best in environments characterised by a high density of similar band waves. Intuitive installation enhances ease of use. The use of the isolator results in increased efficiency and decreases data loss on connectors.
The device uses an Atheros MIPS 74KC 560 MHz processor. The device uses 64 MB internal memory and 16 MB flash drive memory. The device works in the 5,170 - 5,875 MHz band achieving 450+ Mbps bandwidth levels.
The device is 802.11ac standard compliant which results in 450 Mbps bandwidth. It is equipped with a Gigabit 10/100/1000 Mbps port.
The device is highly durable thanks to solid components. It can be used at temperatures ranging from -40 to 70 degrees Celsius.
The device is equipped with a 22 dBi maximum gain antenna.
- works in the 5 GHz band
- 450+ Mbps bandwidth
- 20+ km range
- antenna power gain
- 1,000 Mbit/s maximum data transfer speed
|FREQUENCY||5 GHz||5 GHz||5 GHz|
|THROUGHPUT||450+ Mbps||450+ Mbps||450+ Mbps|
|RANGE||20+ km||25+ km||25+ km|
|ANTENNA GAIN||22 dBi||25 dBi||27 dBi|
|NETWORKING INTERFACE||(1) 10/100/1000 Ethernet Port||(1) 10/100/1000 Ethernet Port||(1) 10/100/1000 Ethernet Port|
|AC input voltage||24|
|Antenna gain level (max)||22|
|Data transfer rate (max)||1000|
|Dimensions (WxDxH)||364 x 276 x 364|
|Ethernet LAN (RJ-45) ports||1|
|Frequency band||5.15 - 5.875|
|Operating relative humidity (H-H)||5 - 95|
|Operating temperature (T-T)||-110|
|Power consumption (typical)||5.5|
|Power over Ethernet (PoE)||Y|