Ubiquiti NanoBeam (PowerBeam) M Series, 5GHz 22dBi dual pol
Ubiquiti NanoBeam PBE-M5-300 radio system
The Ubiquiti NanoBeam PBE-M5-300 radio system works in the 5 GHz band and complies with the 802.11n MIMO 2x2 standard.
This product is equipped with a 560 MHz Atheros MIPS 74KC processor. The device uses 64 MB internal memory and 8 MB flash drive memory.
Its perfected design allows it to be used in areas with high interference levels. By integrating the antenna emitter with the radio module/access point the producer created a new, versatile quality. It can be used at temperatures ranging from -40 to 70 degrees Celsius.
The dual band 300 mm diameter antenna is characterised by a maximum gain of 22 dBi. The device is powered by PoE. It is also equipped with 1 Ethernet 10/100 Mb/s port. The device uses InnerFeed technology which results in an increase in bandwidth and interference resistance.
- works in the 5 GHz band
- 150 Mbps bandwidth
- 22 dBi antenna gain
- 20 km range
- durable construction
- router or bridge mode
- easy installation
- InnerFeed technology
- AirMax technology
The PBE-M5-300 can be installed effortlessly and quickly. The installation of the AF-5X is easy and intuitive.
This device is very versatile. It can work in Router and Bridge modes.
|Frequency Band||5 GHz||5 GHz||5 GHz||2.4 GHz|
|Antenna Gain||29 dBi||25 dBi||22 dBi||18 dBi|
|Dish Reflector||620 mm||400 mm||300 mm||400 mm|
|Throughput||150+ Mbps||150+ Mbps||150+ Mbps||150+ Mbps|
|Range||30+ km||25+ km||20+ km||20+ km|
|Antenna gain level (max)||22|
|Antenna type||Sector antenna|
|Colour of product||White|
|Operating relative humidity (H-H)||5 - 95|
|Operating temperature (T-T)||-110|
|Survival wind speed||200|